The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.  No center support is needed. The core is planed and sanded to the competition oval beam shape.  Our beams are built as close as possible to competition beams for a realistic training experience.  This includes padding, covering, and shape.

The padding is closed cell polyethylene foam.  The same padding that is used on competition beams.  It is covered with heavy-grade synthetic suede material. The material is durable and easy to clean. The work surface is 10.16 cm wide and the beam is 30 cm high.

The support braces are 60.96 cm wide and made of 12 gauge structural steel with rubber end caps to protect the flooring beneath.  This will make a great practice beam. 

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 2.4 m Long x 10.16 cm wide x 30 cm high.
• Steel Support Braces
• Material seams on the bottom are covered
• No exposed staples
• Weight Limit 114 kg

Advanced Elite Training High Bar and Mat

Our High Bar is manufactured at our factory located in the United States. We have designed it to be the strongest and most adaptive high bar on the market today.

Our bar is made of 12 gauge 5.08 cm square tubing with a weighted base for added stability. The Mini Bar height can be adjusted from .89 m to 1.52 m. The telescoping rails can be easily adjusted using the spring-loaded pop pins. No more pins that get lost or work their way loose.

The bar is 1.2 m wide and 2.44 m long. with a 3.8 cm dia. hardwood rail.

The weight limit is 54 kg with the use of our included extension legs.  Additional support can be obtained by adding a full sheet of plywood or MDF over the center braces.

1.2 m x 1.83 m x 5.08 cm FOLDING MAT

The beam is made using cross-grain laminated wood construction. This gives the beam its strength and prevents warping or twisting.  No center support is needed. The core is planed and sanded to the competition oval beam shape.  Our beams are built as close as possible to competition beams for a realistic training experience.  This includes padding, covering, and shape.

The padding is closed cell polyethylene foam.  The same padding that is used on competition beams.  It is covered with a heavy grade synthetic suede material. The material is durable and easy to clean. The work surface is 10.16 cm wide and available in fixed heights of 30 cm, 45cm, 61cm, and a 76cm Adjustable Leg that adjust from 38cm to 76 cm high.  

The support braces are 60.96 cm wide and made of 12 gauge structural steel with rubber end caps to protect the flooring beneath.  This will make a great practice beam.

A set of Lower Legs are Included in the box so you can start out at a low setting and add the higher legs when ready.

• Heavy Grade Synthetic Suede Covering
• Padded Top
• Cross Grain Laminated Wood Construction
• Hand Planed and Sanded Core
• Oval Shaped Sides
• 2.4 m Long x 10.16 cm wide 
• Steel Support Braces 
• Material seams on the bottom are covered
• A set of Lower Legs are Included in the box so you can start out at a low setting and add the higher legs when ready.
• Weight Limit 114 kg

1.2m x 1.83m x 5.08cm FOLDING PANEL MAT

We reinforce all wear points such as corners. Our mat tops don't have any sewed seams except along the edges. We use 5.08cm thick polyethylene foam.

Specifications:

• 5.08cm Polyethelyne foam
• 1.2m 1.83m Folding Panels
• Velcro on two sides
• 18 oz vinyl (Heavy Duty)